Scaffolding Boards For A Strong Work Surface
Scaffolding boards provide a working surface for users of the scaffold. They are made from seasoned wood, wood and aluminum combinations, or all-aluminium and come in three thicknesses (38 mm (usual), 50 mm and 63 mm) are a standard width (225 mm) and are a maximum of 3.9 m long.
The board ends are protected by metal plates called hoop irons or sometimes nail plates.
Timber, steel, laminate boards or aluminium decking are used, as well as boards for the working platform. Sole boards are placed beneath the scaffolding if the surface is soft or there's another reason to suspect them, although ordinary boards can be used. Another design called the scaffpad is made from a rubber base with a base plate molded inside, these are great to put on uneven ground because they adapt to any ground where sole boards would split costing more money to replace.
Tubes are either made of steel or aluminium. If they're made of steel, they're either 'black' or galvanised. The tubes come in a variety of lengths, with a standard diameter of 48.3 mm. (1.5 NPS pipe). The chief difference between the two types of tubes is the lower weight of the aluminium tubes (1.7 kg/m as opposed to 4.4 kg/m). There's also a greater flexibility and so less resistance to force. Tubes are generally bought in 6.3 m lengths; but they can be cut to any size.
Couplers are the fittings which hold these tubes together. The most common are called scaffold couplers. There are three basic types: right-angle couplers, putlog couplers and swivel couplers. To join tubes end-to-end joint pins (also called spigots) or sleeve couplers are used, or both together. Only right angle couplers and swivel couplers can be used to fix tube in a 'load bearing connection'. Single couplers are not load bearing couplers and have no design capacity.
Other common materials lnclude base plates, ladders, ropes, anchor ties, reveal ties, gin wheels, sheeting, etc.
Some particular scaffolding boards would include the Climb-Pro by Michigan Ladder model number 345830 Scaffold Boards is for 12-1/2-Foot Ladders. The Climb-Pro 345830 Scaffold Boards are designed to work with the Climb-Pro #345912 12.5' ladder. This set of 2 boards with anti-skid platform surfaces increase safety and ladder versatility. Made from 9 ply Latvian Birch Plywood for incredible strength, safety, warp resistance and integrity. Single finger release spring loaded clips make attachment & removal easy. Platform boards can remain on the ladder during storage.
Made from 9 Ply Latvian Birch Plywood, it has an anti-skid surface, and spring loaded clips for easy on-off installation.
As far as different types of scaffolding boards that you can purchase, there are Southern Yellow Pine Scaffolding Planks, Aluminum and Wood Planks or All Aluminum Planks. If you order them wholesale, they tend to come in bundle sizes of forty, fifty, seventy, or eighty pieces and can be shipped straight from the mill. They can come in a multitude of sizes, including seven, eight, ten, twelve or sixteen feet.
|